Ricoh 3224C Operating Guide

Copying

❖

❖ When clearing entered values

Press the

{{{{Clear/Stop}}}} key or [Clear]

on the display.

❖

❖ To check the settings

Press the

{{{{Check Modes}}}} key.

Auto Start

Copy starts automatically when the
machine is ready for copy.

AAAA

Set the copy contents while
“

Please wait.

” is displayed.

BBBB

Set the original.

CCCC

Press the

{{{{Start}}}} key. The {{{{Start}}}}

key lamp will flash.

Interrupt Copy

Use this function to interrupt a long
copy job to make urgently needed
copies.

Limitation

❒ You cannot use Interrupt Copy

whe n fax o rig inals are being
scanned.

AAAA

Press the

{{{{Interrupt}}}} key.

The Interrupt indicator lights.

When scanning is interrupted

A Remove the originals that were

being copied, and then place
the originals you want to copy.

B Press the {{{{Start}}}} key.

Copying starts.

C When copying is complete, re-

move the originals and copies.

D Press the {{{{Interrupt}}}} key again.

The Interrupt indicator turns
off.

E When the display prompts you

to do so, place the former set of
originals again.

F Press the {{{{Start}}}} key.

Note

❒ The previous copy job's set-

tings are restored and the
machine continues copying
from where it left off.

When the machine continues
copying

A Place the originals you want to

copy.

B Press the {{{{Start}}}} key.

The machine stops the previous
job and starts copying the new
originals.

C When copying is complete, re-

move originals and copies.

D Press the {{{{Interrupt}}}} key again.

The Interrupt indicator goes
out.
The previous copy job's settings
are restored and the machine
continues copying from where
it left off.

Left Original Beeper

The beeper sounds and an error mes-
sage is displayed if you leave origi-
nals on the exposure glass after
copying.

Note

❒ See p.109 “Tone: Original re-

mains”.

ThemisC1_EN_Copy_F_FM.book Page 20 Monday, December 27, 2004 4:10 PM