Ricoh 3224C Reference Guide

Initial Scanner Setup

96

This section explains how to set the
defaults for scan settings.
The scan settings consist of the fol-
lowing. For the table about settings
and defaults, see p.93 “Scanner Fea-
tures”.

❖

❖

❖

❖ Default Scan Settings

Various basic settings (scan type,
resolution, image density, and
scan size) can be set. You can regis-
ter the scan settings in the same
way as specifying them. For de-
tails, see p.69 “Specifying Scan Set-
tings”.

• Scan Type
• Resolution
• Image Density
• Scan Size

❖

❖

❖

❖ Wait Time for Next Orig.: Exposure Glass

When dividing originals and scan-
ning them individually with the
exposure glass to form a single file,
select [Off], [Set Wait Time], or [Con-
tinuous Wait]

 for the waiting status.

❒ If [SADF] or [Batch] is specified as

 when scan-

ning, this setting is invalid. For
details, see p.73 “Batch/SADF
selection”.

❒ If [Off] is selected, sending will

start automatically after one
page of original is scanned.

❒ If [Set Wait Time] is selected, en-

ter the wait time in seconds (3-
999) for placing additional orig-
inals with the number keys.
Scanning will start if additional
originals are placed and the

{{{{Start}}}} key is pressed within
this time. You can end scanning
and  begin  tran sm is sion  by
pressing the 

{{{{#}}}} key within this

time. Once the specified time
has elapsed, transmission starts
automatically.

❒ If  [Continuous Wait] is selected,

the machine will wait for addi-
tional originals until the 

{{{{#}}}} key

is pressed. Scanning will start
when additional originals are
placed and the 

{{{{Start}}}} key is

pressed. You can end scanning
and begin sending by pressing
the 

{{{{#}}}} key.

❒ If originals are placed in the au-

t o m a t i c   d o c u m e n t   f e e d e r
(ADF), transmission will start
without waiting for additional
originals after all originals in
the ADF have been scanned, re-
gardless of the specified set-
tings.

❒ If a paper misfeed occurs or any

of the following operations is
performed while the machine is
waiting for additional originals,
the countdown stops and does
not start again until the 

{{{{#}}}} key

is pressed.
• Changing the settings such

as the scan settings

• Opening the upper cover of

the ADF

• Pressing the 

{{{{Interrupt}}}} key to

activate the copy mode