Tekkeon ET2000 User Guide
9
USER GUIDE
8
To Answer a Call Waiting Call
(if supported by your mobile phone)
1. When you hear two beeps while connected on a call, press and hold the Volume
-
button until
you hear a short beep followed by a long tone (approximately 3 seconds). The original call will be
placed on hold and the new call be will be connected. Your phone will display the incoming and
connected calls.
placed on hold and the new call be will be connected. Your phone will display the incoming and
connected calls.
2. While connected on a call, press and hold the Volume
-
button to toggle between the two
connected calls.
3. When connected to a call, press TALK to end the call. You will be reconnected to the other call.
NOTE: For some mobile phones, you must configure the phone to answer calls directly on your
Bluetooth headset. Refer to the mobile phone user guide for instructions for initiating this feature.
Bluetooth headset. Refer to the mobile phone user guide for instructions for initiating this feature.
Ending Calls
1. When you have finished your call, press the headset TALK button. The call will be disconnected.
Transferring Calls
You can transfer calls from your mobile phone to your headset, and from your headset to your
mobile phone.
mobile phone.
To Transfer Calls From Your Mobile Phone to The Headset
1. With the call connected to your mobile phone, press the TALK button on your headset. The call
will be connected to your headset.
To Transfer Calls From the Headset to Your Mobile Phone
1. With the call connected to your headset, press and hold the Volume
+
button until you hear a
beep (approximately 3 seconds). The call will be connected to your mobile phone.
To Make Calls Using Voice Dialing
(if supported by your mobile phone)
1. Press the TALK button on your headset. You will hear two beeps.
2. When prompted by the mobile phone (usually about five seconds), speak the name of the person
you wish to call. The call is automatically connected to your headset.
TIP: In a noisy environment, you should dial the number from the mobile phone keypad as the loud
background noise may interfere with voice commands.
background noise may interfere with voice commands.
Receiving Calls
When you receive a call on your mobile phone, you will hear the mobile phone ring before you hear
the ring tone through your headset as there is a small delay before the headset recognizes the
incoming call. If you do not wish to answer the call, you can use the Call Reject feature to reject the
call and send the caller to voice mail (if available).
the ring tone through your headset as there is a small delay before the headset recognizes the
incoming call. If you do not wish to answer the call, you can use the Call Reject feature to reject the
call and send the caller to voice mail (if available).
If the Call Waiting feature is supported by your phone, you can answer an incoming call while you
are connected on another call. In this case, the connected call is placed on hold and the incoming
call is connected. While both calls are connected, you can toggle between the calls.
are connected on another call. In this case, the connected call is placed on hold and the incoming
call is connected. While both calls are connected, you can toggle between the calls.
To Receive a Call
1. When you hear ring tone on your headset, press the headset TALK button. The call is
automatically connected to your headset.
To Reject an Incoming Call
(if supported by your mobile phone)
1. When you hear ring tone on your headset, press and hold the TALK button until you hear two soft
beeps to reject the call (approximately four seconds).