Haier hlf11e User Manual

1. This appliance must be properly grounded. Electrical shock can result if the 

dryer is not properly grounded. Follow the instructions in this manual 
for proper grounding.

2. Do not use an extension cord with this dryer. Some extension cords are not

designed to withstand the amounts of electrical current this dryer utilizes and 
can melt, creating electric shock and/or fire hazard. Locate the dryer within
reach of the receptacle for the length power cord to be purchased, 
allowing some slack in the cord. Refer to the electrical requirements 
in this manual for the proper power cord to be purchased.

3. A U.L. approved strain relief must be installed onto power cord. If the strain 

relief is not attached, the cord can be pulled out of the dryer and can be cut 
by any movement of the cord, resulting in electrical shock.

4. Do not use an aluminum wire receptacle with copper wired power 

cord and plug (or vice versa). A chemical reaction occurs between 
copper and aluminum and can cause electrical shorts. The proper wiring 
and receptacle is a copper wired power cord with a copper wired receptacle.

Dryers operating on 208 Volt power supply will have longer 
drying times than operating on 240 Volt power supply.

Improper connection of the equipment grounding conductor 
can result in a risk of electrical shock. Check with a licensed 
electrician if you are in doubt as to whether the appliance is 
properly grounded.