Haier hlf11e User Manual

1. Remove the screws securing the terminal block access cover 

and the strain relief mounting bracket located on the back 
of the dryer upper corner.

2. Install a U.L. approved strain relief into the power cord entry hole 

of the mounting bracket. Finger tighten the nut only at this time.

3. Remove the green neutral ground wire from the green ground 

screw located above the terminal block.

green
ground
screw

green neutral
ground wire

green power cord
ground wire

silver terminal

terminal block

tighten nut to
these threads

black

white

nut

strain relief 

mounting bracket

power cord

Typical
Conductor
Receptacle

Typical
4 Conductor 
Cord

black 240V

white neutral

red 240V

green ground

red