Haier hwm80-113s User Guide

Ï ´ º ó ´ ¦ À í

14

Wipe the complete unit with soft 

cloth twisted dry.

Wipe with neutral detergent if too dirty

Do not wash it directly by water

2. Take off the corrugation pipe.
    Dismantle  the upper part of the 
    corrugation   pipe    inside    the 
    overflow  filter ( as  indicated in
    Figure 1).

3. Cleaning the overflow filter
    Clean  the lint around the filter
    and  flush with tap water.

4. Install the overflow filter.
    (1).Install the corrugation pipe.
    (2).Insert  the mounting plate at 
         the bottom of  the  filter  into
         the valve cover.
    (3).Hang up the hook at the left 
         upper side.
    (4).Push  the  upper  part  in  as 
          indicated in Figure 2.

Corrugation

 Pipe

Hook

Figure 1

Figure 2

Water level 

adjusting lever

After washing,  dismount the water inlet 
hose.
Do  not  store  water  in  the tub for long 
period. Discharge the water immediately
after each using.
Pull off  the power plug and hang up the
power cord.
Hang up the drain hose.
Wipe off the water drops on the surface
and  inside  the tub with clean soft cloth.
Open the cover of the wash tub and the
inner/outer  cover  of  the  spin  tub   for 
some time (about one hour), then close
them.

Thinner

Alcohol

Petrol