Frigidaire ffgc2605l User Manual

11

Surface Control knob has not been completely turned to LITE. Push in and turn the Surface 

Control knob to LITE until burner ignites and then turn control to desired flame size.
Be sure gas supply valve is open.
Gas-air  mixture  needs  a  straight  line  to  travel.  Be  sure  burner  is  properly  seated  in  its 

support.
Burner ports or slots are clogged. With the burner off, use a small-gauge wire or needle to 

clean ports or slots.
Power cord is disconnected from outlet (electric ignition models). Be sure cord is plugged 

securely into outlet.
Electrical power outage (electric ignition models). Burners can be lit manually. See Setting 

Surface Controls in this Owner’s Guide.

Burner ports or slots are clogged. With the burner off, clean ports with a small-gauge wire 

or needle to clean ports or slots.
Moisture is present after cleaning. Lightly fan the flame and allow burner to operate until flame 

is full. Dry the burners thoroughly following instructions under General Cleaning. 

Dust  particles  in  main  line.  Allow  the  burner  to  operate  a  few  minutes  until  flame  turns 

blue. 
In coastal areas, a slightly orange flame is unavoidable due to salt air.

Before you call for service, review this list. It may save you time and expense. The list includes common 

occurrences that are not the result of defective workmanship or materials in this appliance.