Scitec 5s-c User Manual
22) Press or repeatedly to set the second area code digit (0-9)
23) Press SET to confirm and to select the third area code digit
24) Press or repeatedly to set the third area code digit (0-9)
25) Press SET to confirm and to select the SET PBX PREFIX menu.
26) Press or repeatedly to set the PBX prefix digit (0-9 or none)
27) Press SET to confirm and to select the CALL WAITING? menu.
28) Press or repeatedly to set the Caller ID on call waiting
23) Press SET to confirm and to select the third area code digit
24) Press or repeatedly to set the third area code digit (0-9)
25) Press SET to confirm and to select the SET PBX PREFIX menu.
26) Press or repeatedly to set the PBX prefix digit (0-9 or none)
27) Press SET to confirm and to select the CALL WAITING? menu.
28) Press or repeatedly to set the Caller ID on call waiting
feature ON or OFF. The default mode is ON.
29) Press SET to confirm and to select the CLEAR MESSAGE? menu.
30) Press ▲ or ▼ repeatedly to set the voice message service feature
30) Press ▲ or ▼ repeatedly to set the voice message service feature
ON or OFF. The default is OFF.
31) Press SET to confirm and to select the SET HOLD MODE menu.
32) Press ▲ or ▼ to select LOCAL or PBX hold mode of hold. The
32) Press ▲ or ▼ to select LOCAL or PBX hold mode of hold. The
default mode is PBX.
33) Press SET to confirm and to select the SET PAUSE TIME menu. The
default flash time is 600ms.
34) Press ▲ or ▼ to select a flash time of 600ms, 300ms, 100ms.
35) Press SET to confirm and select the SET PAUSE TIME menu.
36) Press ▲ or ▼ to select a pause time of 2.2s or 3.6s. Default pause
35) Press SET to confirm and select the SET PAUSE TIME menu.
36) Press ▲ or ▼ to select a pause time of 2.2s or 3.6s. Default pause
time is 2.2s.
37) Press SET to confirm and exit user options setup.
Placing a call:
1) Lift the handset or press SPKR and listen for a dial tone.
2) Dial the desired telephone number using the keypad. Dialed digits
1) Lift the handset or press SPKR and listen for a dial tone.
2) Dial the desired telephone number using the keypad. Dialed digits
are displayed on the LCD as the number is dialed. After 15
seconds the dialed digits will be replaced by the call length timer.
3) To end a call, place the handset on the telephone base unit, or if
using the hands-free speakerphone, press the SPKR key. The call
time length will remain on the display for 5 seconds, and then the
display will revert to the standby display mode.
time length will remain on the display for 5 seconds, and then the
display will revert to the standby display mode.
Placing a call on hold (local hold mode):
a.
Using handset: Press HOLD, then place the handset in its
cradle.
b.
Using speakerphone: Press HOLD.
Retrieving a held call:
a.
Using handset: Lift the handset from its cradle.
b.
Using speakerphone: Press SPKR.
Last number redial:
1) Lift the handset or press SPKR and listen for a dial tone.
2) Press REDIAL. The last number dialed will be displayed and
dialed automatically.
Handset Volume Adjustment:
Press VOL repeatedly to adjust the handset volume to the desired
level. One of three levels (low, medium, and high) may be selected.
Speakerphone Volume Adjustment:
To adjust the speakerphone volume, slide the control on the right side