Scitec 5s-c User Manual
of telephone.
Speed Dial Memory Key Programming and Dialing -
Programming the One-Touch Speed Dial Keys (M1~M5):
1) Verify that the phone is on-hook, as speed-dial key programming
Speed Dial Memory Key Programming and Dialing -
Programming the One-Touch Speed Dial Keys (M1~M5):
1) Verify that the phone is on-hook, as speed-dial key programming
may only be performed with the telephone on-hook.
2) Remove the faceplate overlay to gain access to the programming
keys.
3) Press STORE. “STORE NUMBER” will appear on the display.
4) Dial the telephone number to be stored, up to 22 digits. These
4) Dial the telephone number to be stored, up to 22 digits. These
digits may be 0 - 9
WXYZ
, * , # , FLASH and PAUSE,
each of which is counted as one digit.
5) Press the desired one-touch speed dial key (M1 ~ M5) to store the
dialed number in memory.
6) To change a stored number, repeat the instructions above and the
new telephone number will replace the previously stored number.
Making calls with the One-Touch Speed Dial Keys (M1~ M5):
1) Pick up the handset or press SPKR and listen for dial tone.
2) Press the desired one-touch speed dial key M1~M5; the stored
number will be dialed automatically.
Viewing Caller ID entries:
The 5S-c telephone stores Caller ID data for the last 60 calls received,
including “UNAVAILABLE” and “BLOCKED” calls.
1) Press to view calls starting with the newest call.
2) Press to view calls starting with the oldest call.
3) Repeatedly press the or button to scroll through the call list
3) Repeatedly press the or button to scroll through the call list
as desired.
Deleting entries from the Caller ID list –
Deleting a single Caller ID entry:
1) Press or as needed to select the Caller ID entry to be
deleted.
2) Press DEL. “DELETE CALL ? ” will be displayed on the LCD.
3) To cancel without deleting the selected entry, press or
4) To continue deleting the selected caller ID entry, press DEL.
Deleting all Caller ID entries:
1) Press the or to display any caller ID entry.
2) Press and hold DEL for at least 3 seconds, until the LCD displays
3) To cancel without deleting the selected entry, press or
4) To continue deleting the selected caller ID entry, press DEL.
Deleting all Caller ID entries:
1) Press the or to display any caller ID entry.
2) Press and hold DEL for at least 3 seconds, until the LCD displays
“ERASE ALL CALL?”
3) To cancel without deleting any calls, press either or .
4) To continue deleting all entries, press DEL. All entries will be
4) To continue deleting all entries, press DEL. All entries will be
deleted and “NO CALLS” will be displayed on the LCD.
Dialing using a Caller ID entry:
On-hook:
1) Press or to select the caller ID entry to be dialed.
2) Press DIAL. The LCD will display “PICK UP OR ADJ ” for 10 digit
On-hook:
1) Press or to select the caller ID entry to be dialed.
2) Press DIAL. The LCD will display “PICK UP OR ADJ ” for 10 digit
numbers, or “PICK UP PHONE ” for 7 digit or 11 digit numbers.