Siig 4000-mt Installation Instruction

1

This quick installation guide provides instructions for installing a
FiberOptic Switch.

SIIG's line of fiber optic switches are standard switches that meet all
IEEE 802.3u/802.3X standards. A Fast Ethernet Switch is a cost-
effective solution for easing your network congestion problems on
existing shared-hub network by breaking up the collision domain
and by multiplying the network performance. The overall network
transmission speed is increased and the network efficiency is improved
to accommodate high-bandwidth applications, such as imaging
multimedia, and CAD/CAM, etc.

The following models are available :

• FiberOptic Switch 4000-ST (4 ST fiber ports )
• FiberOptic Switch 4000-SC (4 SC fiber ports)

•  FiberOptic Switch  4000-MT (4 MT-RJ  fiber ports)
•  FiberOptic Switch  8020-ST (8 TP & 2 ST fiber ports)
•  FiberOptic Switch  8020-SC (8 TP & 2 SC fiber ports)

• Standards:  IEEE  802.3u and 802.3x 100Base-FX

• Transmission Mode: Full or Half-duplex

• Transmission Speed: 10/100Mbps for TP ports

100Mbps for fiber ports

• Packet Forwarding/Filtering Rate:  148,000 packets/sec full

wire rate on 100Mbps forwarding and filtering. 14,880 packets/
sec full wire rate on 10Mbps forwarding & filtering

• MAC Address and Self-learning: up to 12K

• Buffer Memory: 1024KB

• Flow Control: IEEE 802.3x compliant for full-duplex;

Back pressure flow control for half-duplex

04-0184A