Siig 4000-mt Installation Instruction

2

Models:

4000-ST :

Four 100Base-FX, ST (multi-mode)

4000-SC:

Four 100Base-FX, SC (multi-mode)

4000-MT:

Four 100Base-FX, MT-RJ (multi-mode)

8020-ST:

Eight  10/100Base-TX; RJ-45
Two 100Base-FX, ST (multi-mode)

8020-SC:

Eight  10/100Base-TX; RJ-45
Two 100Base-FX, SC (multi-mode)

• Fiber Optic Connector:

ST/SC/MT-RJ connector (multi-mode), Tx/Rx

• Fiber Optic Cable and Maximum Length:

50/125, 62.5/125 or 100/140 

µm (multi-mode); up to 2000 m

• TP Connector: (For models 8020-ST and 8020-SC only)

• Selectable Duplex Mode Switch: Per fiber port FDX/HDX

DIP switch

• LED Indicators:

Green

Lit when remote device connection is good
Blinks when any traffic is present

Green

Lit when 100Mbps speed is active

Amber

Lit when full-duplex mode is active

Blinks when collision signal is present

Green

Lit when AC power is ON and good

• Power Requirement:

AC Voltage: 100~240V

Frequency: 50~60Hz
Consumptions: Models 4000-ST/SC/MT:  25W Max.

Models 8020-ST/SC:  43W Max.

• Operating Temperature: 32°  to 122° (0° to 50°C)
• Storage Temperature: -40° to 158°F  (-40° to 70°C)

• Relative Humidity: 5% to 90%, non-condensing
• Dimensions:

45mm (H) x 330 (W) x 200mm (D)

46mm (H) x 440 (W) x 220mm (D)