Microtek mv500 User Guide

A Secure Digital (SD)/Multimedia Card (MMC) can be

used to increase the DV camera’s memory capacity.

When a card is installed, video/audio clips and still

images are stored directly onto the SD/MMC card. If a

card is not installed, video/audio clips and still images

are stored in the DV camera’s internal memory.

To install an SD/MMC card:
1. Ensure that the DV camera

is turned off; then open the

SD/MMC card compartment

cover on the base of the DV

camera.

2 Insert and push the SD/

MMC card into the

compartment until you hear

a “click”.

Ensure that the orientation of

the SD/MMC card matches

the SD/MMC card marking in

the SD/MMC compartment.

3. Close the SD/MMC card

compartment cover

securely.

*SD/MMC card is optional and is

not included with your purchase.

If your DV camera is supplied with an AC adapter (5V,

2A), when connected using the AC adapter, the DV

camera can function as a charger, allowing you to

charge the Lithium ion battery or power the DV camera.

Charger LED

1. Plug the AC adapter into the

power source.

2. Ensure that the DV camera

is turned off; then connect

the DC plug of the AC

adapter to the DV camera’s

DC-in connector.

When the DV camera is

connected, the battery starts

to charge, and the charger

LED (Audio mode indicator)

lights up red. After charging

for several hours, the red light

disappears, indicating that the

battery is fully charged.

• Use only the AC adapter

supplied with the DV camera to

charge the Lithium ion battery

(Nokia 8210 compatible only).

Using any other adapter may

damage the DV camera.

• To minimize the risk of fire and/or explosion, do not use

the AC adapter to charge alkaline batteries.