Microtek mv500 User Guide

To remove the SD/MMC card, make sure the DV

camera is turned off, open the SD/MMC card

compartment cover, push the card in, and release; the

card pops out.

• Incorrect insertion of the SD/MMC card may cause a

memory error, blocking you from storing any data in the

SD/MMC card.

• You may lose or damage data if you remove the SD/MMC

card while it is in operation.

For more information, see the Appendix “Using the

SD/MMC card”.

The LCD screen is used to frame the subject while you

take your shots. In addition, you will be able to view the

stored video/audio clips and still images on the LCD

screen as you record it.
When the DV camera is powered on, the LCD screen is

automatically activated, displaying the DV settings

relevant to your current DV mode.

To use the LCD screen:
Swing to open LCD screen from

the side of the DV camera.
The LCD screen is designed to

allow adjustment for viewing

angles. You can adjust the LCD

screen to tilt back to 180

degrees and to tilt forward to

90 degrees.
To protect the LCD screen from

dust and dirt, close it when not

in use.