Nortel 200 Reference Guide
17-8
118814-D Rev. 00
Nautica Configuration Wizard Reference Guide
Parameter:
Enable
Default:
Enable
Options:
Enable, Disable
Function:
Enables or disables NAT.
Instructions:
Only change this option to disable NAT on the router.
Parameter:
Enable Passing Unknown Protocols
Default:
Disabled
Options:
Disabled, Enabled
Function:
To allow or disallow the passing of unknown protocols
through the NAT gateway.
through the NAT gateway.
Instructions:
Enabling this parameter means that outgoing
connections are allowed for any TCP or UDP port.
Leaving it disabled (the default) only allows connections
for ports and protocols that NAT is aware of.
connections are allowed for any TCP or UDP port.
Leaving it disabled (the default) only allows connections
for ports and protocols that NAT is aware of.
Caution:
Disabling NAT in the Edit NAT System window
) disables NAT on any paths that may have been set
up for NAT.
Note:
This setting must be enabled for logging into NT
domains.