Nortel 1200 Supplementary Manual
12
Press firmly to make sure that the converter module is fully
seated.
seated.
4
Fasten the converter module screws to the switch using a
screwdriver.
screwdriver.
and
to continue.
Replacing the converter module
1
Make certain you are properly grounded electrically.
See
See
.
2
Disconnect the DC cable on the converter module by
unscrewing the thumbscrews and gently pulling the cord
out.
unscrewing the thumbscrews and gently pulling the cord
out.
3
Unfasten the captive screws holding the converter module
to the OPTera Metro 1200 Ethernet Service Module, using a
screwdriver.
to the OPTera Metro 1200 Ethernet Service Module, using a
screwdriver.
10558FA
100-240V~
47-63Hz
1.5A-0.75A
47-63Hz
1.5A-0.75A
Redundant P
ower
Redundant P
ower