Nortel 1110 User Guide

 Nortel IP Phone 1150E

553-3001-368 Standard 26.00 August 2007

This section explains how to install and maintain the IP Phone 1150E. For 
information on using the IP Phone 1150E, see the IP Phone 1150E User 
Guide, or the IP Phone 1150E Getting Started Card.

This section contains the following procedures:

•

•

•

•

•

•

•

Note: After an IP Phone is has been installed and configured, if power 
to the phone is interrupted, it is not necessary to reenter IP parameters, 
Node Number, TN, nor firmware again. 

The IP Phone 1150E uses the customer IP data network to communicate with 
the Communication Server 1000. The IP Phone 1150E translates voice into 
data packets for transport using Internet Protocol. A Dynamic Host 
Configuration Protocol (DHCP) server can be used to provide information 
that enables the IP Phone 1150E network connection, and connection to the 
Communication Server 1000.

The IP Phone 1150E is configured for either an Agent, or a Supervisor. The 
IP Phone 1150E is shipped with Agent key configuration but can be modified 
to support Supervisor key configuration by replacing the key caps. Remove 
the key caps using the Key Cap removal tool (product number NTNM19AA). 
For information about IP Phone 1150E components, see “Package 
components” on page 451.