Nortel 1110 Guía Del Usuario
Page 430 of 630
Nortel IP Phone 1150E
553-3001-368 Standard 26.00 August 2007
Introduction
This section explains how to install and maintain the IP Phone 1150E. For
information on using the IP Phone 1150E, see the IP Phone 1150E User
Guide, or the IP Phone 1150E Getting Started Card.
information on using the IP Phone 1150E, see the IP Phone 1150E User
Guide, or the IP Phone 1150E Getting Started Card.
This section contains the following procedures:
•
•
•
•
•
•
•
Note: After an IP Phone is has been installed and configured, if power
to the phone is interrupted, it is not necessary to reenter IP parameters,
Node Number, TN, nor firmware again.
to the phone is interrupted, it is not necessary to reenter IP parameters,
Node Number, TN, nor firmware again.
Description
The IP Phone 1150E uses the customer IP data network to communicate with
the Communication Server 1000. The IP Phone 1150E translates voice into
data packets for transport using Internet Protocol. A Dynamic Host
Configuration Protocol (DHCP) server can be used to provide information
that enables the IP Phone 1150E network connection, and connection to the
Communication Server 1000.
the Communication Server 1000. The IP Phone 1150E translates voice into
data packets for transport using Internet Protocol. A Dynamic Host
Configuration Protocol (DHCP) server can be used to provide information
that enables the IP Phone 1150E network connection, and connection to the
Communication Server 1000.
The IP Phone 1150E is configured for either an Agent, or a Supervisor. The
IP Phone 1150E is shipped with Agent key configuration but can be modified
to support Supervisor key configuration by replacing the key caps. Remove
the key caps using the Key Cap removal tool (product number NTNM19AA).
For information about IP Phone 1150E components, see “Package
components” on page 451.
IP Phone 1150E is shipped with Agent key configuration but can be modified
to support Supervisor key configuration by replacing the key caps. Remove
the key caps using the Key Cap removal tool (product number NTNM19AA).
For information about IP Phone 1150E components, see “Package
components” on page 451.