Extreme x250e-24t Installation Instruction
Summit Family Switches Hardware Installation Guide
125
5
Installing Summit External Power Supplies
This chapter describes how to install external power supplies with the Summit family switches. The
chapter includes the following sections:
chapter includes the following sections:
●
●
●
●
●
●
Read the information in this chapter thoroughly before you start to install or remove an external power
supply.
supply.
Safety
Only trained service personnel should perform service to Extreme Networks switches and their
components. Trained service personnel have read all related installation manuals, have the technical
training and experience necessary to be aware of the hazards to which they are exposed in performing a
task, and are aware of measures to minimize the danger to themselves or other persons.
components. Trained service personnel have read all related installation manuals, have the technical
training and experience necessary to be aware of the hazards to which they are exposed in performing a
task, and are aware of measures to minimize the danger to themselves or other persons.
NOTE
See
for additional safety information and
for additional information regarding regulatory compliance certifications.
CAUTION
Be sure that proper ESD controls are in use before switch maintenance is performed. This includes but is not
limited to wrist straps that are grounded to the switch chassis and earth grounds.
limited to wrist straps that are grounded to the switch chassis and earth grounds.
CAUTION
The EPS must be installed or removed only by trained service personnel in accordance with the installation
instructions. Before installing or removing any components of the system, or before carrying out any maintenance
procedures, read the safety information provided in
instructions. Before installing or removing any components of the system, or before carrying out any maintenance
procedures, read the safety information provided in
of this guide. Not following these precautions can
result in equipment damage or shock.
WARNING!
Extreme Networks AC PSUs do not have switches for turning the unit on and off. Remove the wall plug from the
electrical outlet to disconnect the power to an Extreme Networks AC PSU. Make sure that this connection is easily
accessible.
electrical outlet to disconnect the power to an Extreme Networks AC PSU. Make sure that this connection is easily
accessible.