Extreme x250e-24t Installation Instruction

Summit Family Switches Hardware Installation Guide

To rack mount the EPS-T:

Place the EPS-T upright on a stable surface, with the front facing you.

Remove the mounting bracket kit from the packaging.

Attach the mounting brackets as follows:

Place a mounting bracket over the mounting holes on one side of the EPS-T (see 

Insert the screws and fully tighten them using a screwdriver.

Repeat steps 

 and 

 for the other side of the EPS-T.

Slide the EPS-T into a 19-inch rack and secure it using appropriate rack-mount screws. 

To install an EPS-160 power supply into the EPS-T:

Remove the EPS-160 power supply from the packing material.

Remove the cover plate from an empty slot on the EPS-T.

Insert the power supply into the empty slot on the EPS-T.

Tighten the captive thumbscrews to secure the power supply to the EPS-T.

Connect the EPS-160 power supply to the Summit switch, following the instructions in the next 
section, “

One end of the EPS-160 redundant power cord has a keyed connector to ensure correct alignment of the 
connector (

). The key is a plastic tab on the cord connector housing that fits into the EPS-160 

unit to ensure correct alignment of the connector. 

ES4K026