Extreme 3802 Installation Guide
300
Extreme Networks Consolidated "i" and "e" Series Hardware Installation Guide
Replacing the BlackDiamond 6800 Series Switch Fan Tray
To remove a fan tray from the BlackDiamond 6800 series switch:
1
Attach the ESD strap to your wrist and connect the metal end to the ground receptacle on the top
left corner of the switch front panel.
left corner of the switch front panel.
2
Use a #1 Phillips screwdriver to unscrew the screws that secure the fan tray to the chassis.
Put the screws from the BlackDiamond 6808 fan tray aside in a safe place.
3
Using the handles on the front of the fan tray, pull it straight out of the chassis approximately ½ inch
(12.7 mm), as shown in Figure 171 and Figure 172. This action disconnects the power to the fan tray.
(12.7 mm), as shown in Figure 171 and Figure 172. This action disconnects the power to the fan tray.
Figure 171: Removing a BlackDiamond 6816 or BlackDiamond 6804 fan tray
BD_030