Intermec 10I2 User Guide
74
EasyLAN User’s Guide
Chapter 6 — Advanced Confi guration
.READ_COM
Read Community. Community with rights
to read the SNMP MIBs.
to read the SNMP MIBs.
RTEL_PR1
net1: TCP Port Number. Th
e default port
number for raw TCP.
SMTP_ADDR
E-mail (SMTP) server.
SNMP_AUT
Authentifi cation Failure Trap, enabled/dis-
abled.
SMTP_INP
Settings for SMTP Server (Manual or
DHCP).
DHCP).
SMTP_PORT
E-mail (SMTP) port (default 25).
SYS_CONT
System Contact (printer administrator)
(optional).
(optional).
SYS_LOC
System (printer) location (optional).
SYS_NAME
SNMP Name. Administrative name for the
SNMP Node.
SNMP Node.
.TCT_LIMIT1
Th
e variable to set the Odometer Count1
limit. Defi nes when an odometer count1
alert message shall be sent.
alert message shall be sent.
.TCT_UNIT1
Th
ermal Counter Unit. Th
is object is used
to set the unit of measurement to either
forms (labels) or meters for the Odometer
Counter. Th
forms (labels) or meters for the Odometer
Counter. Th
is object is used in combination
with the .TCT_LIMIT1 object and the
odometer count 1 alert.
odometer count 1 alert.
TESTMAIL
Submit test e-mail. When this variable is set
to yes, a test e-mail is generated and sent to
the default address. After the e-mail is sent,
the variable reverts back to default (no).
to yes, a test e-mail is generated and sent to
the default address. After the e-mail is sent,
the variable reverts back to default (no).
TIMESERVER
Timeserver host name (for DDNS with
TSIG)
TSIG)
TRAP_COM
Trap Community. Th
is defi nes what
community the SNMP Traps should be sent
to.
to.
TRAP_ENABLE
Trap status (enable, disable, delete).