Intermec 5055 Supplementary Manual

"

NOTE: These instructions are tied to the 5055 Toolkit V3.0:

The 5055 Toolkit V3.0 CDĆROM is used to restore the main partition and recovery partition

on a 5055 Data Collection PC.
The UPDATE.BAT batch file displays menus and does most of the recovery process.  This

file can also be located in an \Update" server folder, shared between the 5055 PC and the

server.  For example, C:\5055base\Update" is the directory structure that runs the

RUNME.BAT file off the CDĆROM.

"

NOTE: If the 5055 PC does not have a recovery partition, see the “5055 Data Collection PC Technical

The server must have the following before Windows 95 or NT 4.0 can be restored on the

5055 PC: a 10BaseĆT connection to a NetBEUI Network, any version of Windows 95, 98,

NT 4.0, or 2000, and enabled file/print sharing.
The RUNME.BAT file from the toolkit CDĆROM creates a Recovery Partition" within a

folder on the server.  This folder can be customized to suit specific needs.

1. Insert this CDĆROM in a computer connected to the network and share its CDĆROM

drive with the name:  CDROM.

2. From the Windows desktop, select Start 

→

 Run, type D:\runme.bat, then click OK

to run the installation wizard.  D:\ is the CDĆROM drive in this example.

See the 5055 PC Technical Reference" for instructions to enable file/print sharing (Windows

95), share the CDĆROM drive, or install the contents of the Toolkit CDĆROM.

The client 5055 PC must have SystemSoft BIOS version 1.21 or later, a 10BaseĆT connecĆ

tion to a NetBEUI Network, and an attached PS/2 keyboard before doing this recovery.

3. Reboot the 5055 PC, wait for the following prompt after the system memory tests,

then simultaneously press <Ctrl>, <Alt>, [R] to enter the recovery partition.

4. If the following menu appears, go to the Original Recovery Partition" section.

5. If the following menu appears, go to the New Recovery Partition" section.