Intermec 5055 Supplementary Manual
5055 Data Collection PC Recovery Instructions 3
Original Recovery Partition
Do the following to update the recovery partition to the latest files:
1. Press [2] to select Boot to DOS Network, then press <Enter>.
2. Check the server's network share name and the network cable connections. Change
2. Check the server's network share name and the network cable connections. Change
to the folder that has the NET.EXE file, type Net Use Q: \\SERVER\CDROM, then
press <Enter>. SERVER" is the computer in which the CDĆROM is installed.
3. Type Q: CD\UPDATE, then type update.bat and press <Enter> to display the
Main Menu." See the README.TXT file on the 5055 Toolkit CDĆROM for explanaĆ
tions of the menu options.
4. Press [2] to select Administration Options, then press [3] to select Update
Recovery Partition. At the warning prompt, press [Y] to continue.
5. Reboot the 5055 PC, wait for the following prompt after the system memory tests,
then simultaneously press <Ctrl>, <Alt>, [R] to enter the recovery partition, then go
to the New Recovery Partition" section.
<CTRL–ALT–S> to enter the System Configuration Utility
New Recovery Partition
Do the following to restore the main partition. See the 5055 Technical Reference for addiĆ
tional Administrative Options" menu information.
1. Press [1] if NetBEUI is used for network connections or [2] if TCP/IP is used, then
press <Enter>. At each prompt, enter the applicable information or wait 10 seconds
for the default information.
"
NOTE: If TCP/IP Recovery is elected, the default gateway (defaultgateway0), the subnet mask (subnet-
mask0), and the ip address (ipaddress0) are to be entered. Use spaces between digits instead of
periods. For example: type “225 255 255 0” instead of “255.255.255.0” for the default gateway.
periods. For example: type “225 255 255 0” instead of “255.255.255.0” for the default gateway.
2. Enter the network share name with the UPDATE.BAT file. If a custom"
UPDATE.BAT file is saved on a server, enter its shared path. The shared location of
the 5055 Toolkit CD can also be entered, for example: \\SERVER\CDROM
3. Press [1] from the UPDATE.BAT menu to restore the main partition from a PQI file.
This requires PowerQuest EasyRestore (PQER).
4. Note that the folder must be shared. Enter the path to the PQI image to be restored,
for example: \\SERVER\FOLDERNAME
If the PQI image is on the CDĆROM, then type: \\MYPC\CDROM.
If a custom PQI file is located in an Images" folder on the PC, then type:
If the PQI image is on the CDĆROM, then type: \\MYPC\CDROM.
If a custom PQI file is located in an Images" folder on the PC, then type:
\\MYPC\IMAGES.
5. Type the name of the PQI file to be restored. If this file is in a folder below the shared
folder, type the path. For example, if the root of the CDĆROM drive is shared and the
NT_V30.PQI file is in the Images" folder, then type: IMAGES\NT_V30.PQI
"
NOTE: The default PQI file names will change for each version of the released toolkits. For example:
NT_V31.PQI or W95_V31.PQI.