Intermec 5020 User Guide
Chapter 7 — Trakker Antares Terminals
Data Collection Browser User’s Guide
83
The following table lists special dcBrowser client key combinations that you
may want to use while you are running your HTML application.
may want to use while you are running your HTML application.
Displaying Different Font Types (Optional)
The dcBrowser client displays the fonts on the Trakker Antares terminal as
the 8 x 8 font type. To display different fonts, you can modify and
download the
the 8 x 8 font type. To display different fonts, you can modify and
download the
IMDCB.INI
file.
To display different fonts
1
Open
IMDCB.INI
in a text editor. In a standard installation,
IMDCB.INI
is in
C:\PROGRAMFILES\INTERMEC\DCBROWSER\
CLIENT\TRAKKER\IMDCB.INI
.
2
Enter the following lines (only available with firmware v7.0 and above):
#set font to fonttype
IM_COMMAND=$+DTX
IM_COMMAND=$+DTX
dcBrowser Client Key Combinations
Client Keys
Description
Ctrl-C
Clear screen
Ctrl-D
Toggle Debug mode
Ctrl
-P
Restart communications with dcBrowser gateway and return to home
page
page
Ctrl-N
Ping the dcBrowser gateway
Ctrl-T
Toggle Timing mode (shows round trip time on each screen)
Ctrl-W
Refresh screen
Ctrl
-X
Reboots the terminal and restarts the dcBrowser client
Ctrl-]
Decrease contrast
Ctrl-}
Increase contrast
Ctrl-[
Increase volume
Ctrl-{
Decrease volume