Intermec 5020 User Guide
Chapter 7 — Trakker Antares Terminals
Data Collection Browser User’s Guide
81
4
Set the Host IP Address field or the Controller IP Address field to the
dcBrowser gateway IP address.
dcBrowser gateway IP address.
5
Set the Terminal IP Address field to the IP address of the terminal and
press ;. The Communications menu appears.
press ;. The Communications menu appears.
6
Choose Advanced Network. The Advanced Network screen appears.
7
Set the Network Port field to 4055 for TCP/IP or 05555 for UDP Plus
and press ;. The Communications menu appears.
and press ;. The Communications menu appears.
You may still need to configure your terminals to communicate with the
access points. For help, see your terminal user’s manual and your access
point user’s manual.
access points. For help, see your terminal user’s manual and your access
point user’s manual.
Connecting to the dcBrowser Gateway
After you start the web server and the dcBrowser gateway, you can start
running your HTML application on your devices.
running your HTML application on your devices.
To connect to the dcBrowser gateway
• Scan this bar code:
Run Program C:DCBT24.BIN
*/O/OC/ZDCBT24.BIN*
*//C:DCBT24.BIN*
TCP/IP
UDP Plus
ADVANCED NETWORK
Network Port: 4055
Subnet Mask:
255.255.255.0
Default Router
0.0.0.0.
TCP/IP Maximum
Transmit Timeout:
020 sec
OK
CANCEL
OK
CANCEL
ADVANCED NETWORK
Network Port: O5555
Subnet Mask:
255.255.255.0
Default Router
0.0.0.0.
TCP/IP Maximum
Transmit Timeout:
020 sec
OK
CANCEL
OK
CANCEL