Intermec cn2a User Guide

Copy your application file to the SD card.

If you are using ActiveSync or Wavelink Avalanche to copy 
the files to the SD card, place the application in the SDMMC 
Disk folder located in My Computer.

If you are using an SD card reader, insert the SD card back 
into the CN2A.

Navigate to the SDMMC Disk folder and run your 
application.

After your application is installed, you can run it from the 
Program Files folder from My Computer.

You can use the SmartSystems Console to drag-and-drop 
Intermec applications onto your CN2As. The CN2A ships with 
the SmartSystems client loaded on it. 

The Console is part of SmartSystems Foundation and is available 
from the Intermec web site. To download SmartSystems 
Foundation, go to www.intermec.com/idl and open the Device 
Management page.

Download your application file from the Intermec web site 
and unzip it on your desktop.

From the SmartSystems Console, drag-and-drop the 
application onto each CN2A discovered in your network.

For more information on using the SmartSystems Console, see 
the online help.

You can use the Wavelink Avalanche device management system 
to install applications on all of your wireless CN2As. 

The wireless CN2A ships with the Avalanche Enabler already 
loaded on it. The Avalanche Enabler is configured to activate 
automatically (typically on a warm boot). 

Note: If you manually activate the Avalanche Enabler on the 
CN2A, you may be prompted for a password when you exit the 
Avalanche Enabler. The default password is 

leave

.