Intermec cn2a User Guide
Chapter 5 — Troubleshooting and Maintaining the CN2A
118
CN2A Mobile Computer User’s Manual
Using an SD Card to Upgrade the CN2A
To use an SD card to upgrade the CN2A, you need:
• an SD card reader.
• an SD card formatted as FAT16.
To upgrade the CN2A using an SD card
1
Make sure you have downloaded the upgrade .exe file to your
desktop PC, as described in “Downloading the Upgrade .exe
File to Your PC” on page 114.
desktop PC, as described in “Downloading the Upgrade .exe
File to Your PC” on page 114.
2
Double-click the upgrade .exe file on your desktop PC. An
InstallShield application starts. This application guides you
through the process of extracting the upgrade files to your PC
or to your SD card.
InstallShield application starts. This application guides you
through the process of extracting the upgrade files to your PC
or to your SD card.
3
If you have already downloaded this upgrade .exe file to this
PC, the InstallShield Welcome screen prompts you to modify,
repair, or remove the InstallShield application. You can choose
Modify or Remove.
PC, the InstallShield Welcome screen prompts you to modify,
repair, or remove the InstallShield application. You can choose
Modify or Remove.
If you choose Remove, the InstallShield application is deleted
from your PC, and you must double-click the upgrade .exe
file to start the InstallShield application again.
from your PC, and you must double-click the upgrade .exe
file to start the InstallShield application again.
4
If SmartSystems is not installed on your PC, you see the
message, “Do you want to copy the files directly to your SD
Card?”
message, “Do you want to copy the files directly to your SD
Card?”
• Choose Yes if you want the InstallShield application to
copy the files to one or more SD cards after copying the
files to your PC. An SD card reader must be connected to
your PC, and an SD card formatted as FAT16 must be
installed in the reader. The prompt, “Copy to another SD
card? Note: Put the card in before answering YES,” lets
files to your PC. An SD card reader must be connected to
your PC, and an SD card formatted as FAT16 must be
installed in the reader. The prompt, “Copy to another SD
card? Note: Put the card in before answering YES,” lets
Note: The CN2A currently supports SanDisk SD cards only.
Intermec cannot guarantee that other SD cards will work with the
CN2A.
Intermec cannot guarantee that other SD cards will work with the
CN2A.
Note: The following steps do not describe every InstallShield
screen; instead, these steps describe only the important
decision points.
screen; instead, these steps describe only the important
decision points.