Intermec cn2a User Guide
Chapter 1 — Using the CN2A Mobile Computer
CN2A Mobile Computer User’s Manual
7
5
Connect the CN2A power supply (Model 074246) to the
power connector on the back of the CN2 USB client dock
(Model AD7) or the CN2 modem dock (Model AD8). For
help, see the instructions that shipped with the dock.
power connector on the back of the CN2 USB client dock
(Model AD7) or the CN2 modem dock (Model AD8). For
help, see the instructions that shipped with the dock.
6
Connect the power cord to the CN2 power supply.
7
Connect the power cord to an AC power outlet. The green
Power light on the dock turns on.
Power light on the dock turns on.
8
Place the CN2A in the dock. The battery is fully charged in
approximately 4 hours.
approximately 4 hours.
Removing the Battery
Follow these instructions to remove the battery from the CN2A.
You must use only the Intermec power supply approved for
use with the CN2A. Using any other power supply will
damage the CN2A.
use with the CN2A. Using any other power supply will
damage the CN2A.
AC power
supply
supply
USB client dock
Power
light
light
CN2
Use only the stylus to remove the battery. If you use any other
tool or method to remove the battery, you may damage the
battery or the CN2A.
tool or method to remove the battery, you may damage the
battery or the CN2A.