Intermec cn2a User Guide

Press and release the key below the function printed on the 
keypad overlay. For example, press the 

 key again to access 

the F5 function, which refreshes the selected folder or 
desktop. The 

 icon turns off. 

If you do not press another key within 3 seconds of pressing the 

 key, the 

 icon turns off and Orange mode is disabled.

The Power key is the round yellow key in the upper left corner of 
both keypads. 

 

To turn on the CN2A

Press and release the 
Power key.

Your CN2A resumes where it was when you 
turned it off. If you are using WPA or 802.1x 
security, the computer may need to 
reauthenticate before it starts your application.
If your CN2A does not resume after you press 
the Power key, your battery may be too low to 
supply power. Replace or charge the battery. If 
replacing or charging the battery does not solve 
the problem, see “Booting the CN2A” on 
page 111.

To turn off the CN2A Press the Power key 

for 2 to 3 seconds 
and then release it.

Your CN2A enters Suspend mode. In Suspend 
mode, the CN2A continues to supply power to 
all memory, but turns off power to most 
hardware. This power-saving feature is designed 
to prolong battery life.

To toggle the backlight Press the Power key 

for 5 to 6 seconds 
and then release it.

The CN2A backlight toggles (turns on or off ) 
but the CN2A continues running.

To warm boot the 
CN2A

Press the Power key 
for 10 seconds (until 
the backlight flashes) 
and then release it.

For details, see “Warm Booting the CN2A” on 
page 111.