Intermec cn2a User Guide
Chapter 1 — Using the CN2A Mobile Computer
CN2A Mobile Computer User’s Manual
25
4
From the Intermec Settings application, go to Scanners
Symbologies > Internal Scanner > Symbologies.
Symbologies > Internal Scanner > Symbologies.
5
Select a symbology and modify its parameters.
6
Tap
to save your settings and tap
X
to exit Intermec
Settings. The Scanner Symbologies window appears.
7
Tap Back.
8
Scan bar code labels.
Increasing File Storage With the Optional SD Card
You can use a SanDisk secure digital (SD) card to increase file
storage and install applications and files. The SD card slot is
located under the CN2A battery.
storage and install applications and files. The SD card slot is
located under the CN2A battery.
The following procedures explain how to:
• insert an SD card.
• access the files on an SD card.
• remove an SD card.
For help using an SD card to install applications and files, see
“Installing Applications Using the Optional SD Card” on
page 92.
“Installing Applications Using the Optional SD Card” on
page 92.
To insert the SD card
1
Before inserting the SD card, you must attach one of the
pull-tabs that ships with the CN2A. An SD card without a
pull-tab can be very difficult to remove.
pull-tabs that ships with the CN2A. An SD card without a
pull-tab can be very difficult to remove.
2
Align the SD card as shown in the next illustration, and insert
the SD card into the slot.
the SD card into the slot.
Note: The CN2A currently supports SanDisk SD cards only.
Intermec cannot guarantee that other SD cards will work with the
CN2A.
Intermec cannot guarantee that other SD cards will work with the
CN2A.
SD card
Pull-tab