Intermec cn2a User Guide
Chapter 3 — Adding the CN2A to the Network
60
CN2A Mobile Computer User’s Manual
Configuring 802.1x Security With Microsoft Security
Follow these steps to configure 802.1x Security with Microsoft
Security.
Security.
To configure 802.1x Security with Microsoft Security
1
Make sure you have configured the communications and
radio parameters on your CN2A.
radio parameters on your CN2A.
2
Make sure you have selected Microsoft as your security
choice, as described in “Choosing Between Funk Security and
Microsoft Security Software” on page 50.
choice, as described in “Choosing Between Funk Security and
Microsoft Security Software” on page 50.
3
If you plan to use TLS for authentication, load a user and root
certificate on your CN2A. For help, see “Loading
Certificates” on page 65.
certificate on your CN2A. For help, see “Loading
Certificates” on page 65.
4
Open Intermec Settings.
5
Choose Communications > 802.11 Radio > Microsoft
Security.
Security.
6
For Infrastructure Mode, choose Infrastructure.
7
For Network Authentication, choose Open.
8
For Data Encryption, choose WEP.
9
For 802.1X Authentication, choose TLS or PEAP, and tap
or press Enter.
If you choose TLS:
a
Select Properties and tap Run App. The Authentication
Settings box appears.
Settings box appears.