Intermec cn2a User Guide
Chapter 3 — Adding the CN2A to the Network
CN2A Mobile Computer User’s Manual
63
6
For Association, select Open, WPA, or Network EAP and
tap
tap
or
press
Enter. Encryption automatically defaults to
TKIP if you choose WPA, and to WEP if you choose OPen or
Network EAP.
Network EAP.
7
For Prompt for Credentials, choose Enter credentials now.
8
Select User Name, type your user name, and tap
or press
Enter.
9
Select User Password, type your password, and tap
or
press Enter.
10
Exit Intermec Settings. If prompted to save your settings, tap
Yes.
Yes.
Using Static WEP Security
The CN2A uses the Wired Equivalent Privacy (WEP) protocol to
add security to your wireless network based on the 802.11b
standard.
add security to your wireless network based on the 802.11b
standard.
To use WEP security, you need:
• an access point with an 802.11b/g radio.
• a CN2A mobile computer with an 802.11b/g radio.
Configuring Static WEP Security With Funk Security
Follow these steps to configure static WEP security with Funk
Security.
Security.
To configure static WEP security with Funk Security
1
Make sure you have configured the communications and
radio parameters on your CN2A.
radio parameters on your CN2A.
2
Make sure you have selected Funk as your security choice, as
described in “Choosing Between Funk Security and Microsoft
Security Software” on page 50.
described in “Choosing Between Funk Security and Microsoft
Security Software” on page 50.
3
Open Intermec Settings.
Note: You can use Prompt for password to troubleshoot your
connection to the network if you have problems.
connection to the network if you have problems.