Intermec 6651 User Guide

The battery pack is a consumable. When it discharges quickly after charging, the
battery pack is exhausted. Replace it with a new battery pack (PN:871-012-010).

•

  Make sure you use a battery pack (PN:871-012-010) that is designed for use

with this device. Other battery packs may cause fire or result in data loss.

•

  When replacing the battery pack, make sure two backup batteries (for data

backup) are installed. If you remove both the battery pack and the backup
batteries, you will lose all of your data and settings.

1.  Confirm that backup batteries are installed and that they are working.

You can confirm the remaining life of the lithium battery (backup batteries) in
Power management on the control panel.

 

2.  Turn off the power and wait approximately 3 seconds.

 

3.  Open the display slightly, then turn the device upside down.

Note:
You cannot replace the battery pack if the display is closed (locked).

4.  Slide the lock switches to the 

 position.

 

 

 

5.  Remove the battery pack from the device.