Intermec 6651 User Guide

6.  Align the new battery pack with the rails on the device and insert it, making

sure you keep it straight.

 

 

 

7.  Slide the lock switches to the 

 position. If the lock switches will not move,

reinsert the battery pack.

 

 

 

8.  Turn on the power to the device and confirm that it is operating normally.

When the backup batteries for data backup are exhausted and the message
prompting you to replace them is displayed, replace them with two new type
CR2032 lithium batteries. If the low battery warnings for the backup batteries and
the main battery are both displayed at the same time, replace the backup batteries
after you have recharged the battery pack (main battery).

•

  Make sure you use two type CR2032 lithium batteries. Other types of lithium

batteries may cause fire or harm data.

•

  Replace both backup batteries with new ones at the same time.

•

  When replacing backup batteries, make sure the battery pack is installed. If you

remove both the battery pack and the backup battery, you will lose all of your
data.

•

  Before replacing backup batteries, back up all data to a PC or memory card.

•

  In order to discharge static electricity stored in your body, touch a metal object

with your hands before you start to replace the batteries.

1.  Confirm that the battery pack is installed and that it is working.

Confirm battery pack (main battery) life in Power management on the control