Intermec ck61 Installation Instruction
Vehicle Dock Kit Installation Instructions
11
Repeat Steps 3 through 6 for the negative (brown) wire from the
battery cable, connecting the wire to the negative (-) battery
terminal.
battery cable, connecting the wire to the negative (-) battery
terminal.
Fastening the Ground Strap
The white connector on the battery power cable has a braided
green wire grounding strap that you must fasten to the vehicle’s
sheet metal to ensure proper cable shielding.
green wire grounding strap that you must fasten to the vehicle’s
sheet metal to ensure proper cable shielding.
To fasten this ground strap
1
Drill a small hole into the metal where you intend to fasten
the ground strap.
the ground strap.
2
Use a punch to dimple and enlarge the hole. Make sure the
hole is the same size as the screw.
hole is the same size as the screw.
3
Scrape a small circle of paint from around the hole. Make sure
to expose bare metal to make a good electrical connection.
to expose bare metal to make a good electrical connection.
4
Use a #8 x 5/8” screw and flat washer to secure the green
grounding strap.
grounding strap.
Washers
Nut (2)
Positive battery terminal
Battery
Positive battery cable
5/16" x 1-1/2" post
Fuse link
Brown wire (negative)
Gray power cable
Red wire (positive)