Intermec 6622 User Guide

SECTION 3

Software

PEN*KEY

6622 Pen Computer User’s Guide

3-5

isea.bmp (256 colors)
ichaos.bmp (256 colors)
itool.bmp (256 colors)
ileather.bmp (256 colors)

4) Tap [OK].

NOTE:

Because the 1.6 million-color wallpapers use a lot of memory, some ap-

plication software might not run if one of these is selected. In this event,

specify a different type of wallpaper.

Setup Utility

The Setup utility is used to change settings in the following
types of situations:

When setting the date or time

When making power management settings

When expanding the system by adding peripherals

NOTE:

The settings made through the setup utility are stored in a special type of

memory called ”CMOS RAM.” Because the contents of this memory are

maintained by the internal backup battery, these settings are not lost even

if the power is turned off or the system is reset. When the system power

is turned on, the system reads the information stored in CMOS RAM and

compares the information with that obtained through the environment check

performed by the Power On Self Test (POST). If an error is detected, an

error message is displayed on the screen and instructions to execute the

Setup utility are also displayed.

NOTE:

The pen computer has an internal lithium ion battery that it uses as a

backup power supply for CMOS RAM. If the pen computer is not used

for an extended period (at least six months), the backup battery may be-

come exhausted and the contents of CMOS RAM will be lost. The back-

up battery can be recharged in about eight hours, either by installing a

fully charged battery pack (NPN:871-006-020) in the pen computer, or

by connecting the AC adapter/recharger.