Intermec 6622 User Guide
SECTION 6
"
Troubleshooting
6-2
PEN*KEY
R
6622 Pen Computer User’s Guide
The power lamp does not light even
though the power is turned on.
"
Confirm that the power cord is connected properly.
"
Connect another electric device to the power outlet in order to
confirm that power is flowing from the outlet.
confirm that power is flowing from the outlet.
The display is blank.
"
Push the Power button to confirm that the power management
function is not currently engaged.
function is not currently engaged.
"
Check the power lamp and confirm that power is being supplied
to the pen terminal.
to the pen terminal.
"
Check that there is power remaining in the battery pack(s) and
confirm proper battery installation in the pen computer.
confirm proper battery installation in the pen computer.
"
Check the brightness of the display.
"
If you try all of the above measures and the display is still blank,
turn off the pen computer, wait 10 seconds, and then turn the
power back on.
turn off the pen computer, wait 10 seconds, and then turn the
power back on.
The system will not start up.
"
Confirm that the floppy disk in the floppy disk drive, if any, con-
tains the operating system.
tains the operating system.
"
Confirm that the system files have not been deleted from the
hard disk.
hard disk.
The correct date and time are not dis-
played.
"
Connect the AC adapter/recharger for at least eight hours in
order to charge the backup battery.
order to charge the backup battery.
"
Use the Setup utility to set the correct date and time.
"
Use the Date and Time command of the operating system to
correct the date and time.
correct the date and time.
"
If the correct date and time are still not displayed, contact your
dealer and have the backup battery on the system board re-
placed.
dealer and have the backup battery on the system board re-
placed.