Intermec cn30 User Guide

802.1x security provides centralized user authentication using an authenti-
cation server, authenticators (access points), and supplicants. These compo-
nents communicate using an EAP authentication type, such as TLS 
(Transport Layer Security) or PEAP (Protected Extensible Authentication 
Protocol). 802.1x security provides data encryption using dynamic WEP 
key management. To use 802.1x security, you need:

• An authentication server Note that you can also use a MobileLAN access 

• An access point with an 802.11b/g radio

• A CN30 Computer with an 802.11b/g radio and the 802.1x/WPA secu-

rity option

Configuring 802.1x Security With Funk Security
Use this procedure to set 802.1x security on your CN30 Computer with 
Funk security.

Make sure you have configured the communications and radio parame-
ters on your CN30 Computer and that Funk is your security choice.

Open Intermec Settings. Tap (+) to expand Communications > 802.11 
Radio > Funk Security > Profile X with “X” being “1” through “4.”

For Association, select “Open” and press Enter. 

For Encryption, select “WEP” and press Enter.

For 8021x, select “TTLS,” “PEAP,” or “TLS” and press Enter.

If you select “TTLS” or “PEAP:”

Select User Name, type your user name, then press Enter.

Select User Password, type a user password, then press Enter.

For Validate Server Certificate, select “Yes,” then press Enter. Note 
that you must have the date on the CN30 Computer set correctly when you 
enable Validate Server Certificate.