Intermec cn30 User Guide

For Encryption, select “WEP” and press Enter.

Select User Name, type your user name, then press Enter.

Select User Password, type a user password, press Enter, then exit the 
Intermec Settings applet.

The CN30 Computer uses the Wired Equivalent Privacy (WEP) protocol 
to add security to your wireless network based on the 802.11b standard. To 
use WEP security, you need a CN30 Computer with an 802.11b/g radio 
and an access point with an 802.11b/g radio.

Configuring Static WEP Security With Funk Security
Use this procedure to set Static WEP security on your CN30 Computer 
with Funk security.

Make sure you have configured the communications and radio parame-
ters on your CN30 Computer and that Funk is your security choice.

Open Intermec Settings. Tap (+) to expand Communications > 802.11 
Radio > Funk Security > Profile X with “X” being “1” through “4.”.

For Association, select “Open” and press Enter. 

For Encryption, select “WEP” and press Enter.

For 8021x, select “None” and press Enter.

For Transmit key, define a value for each key, up to four. Enter an ASCII 
key or a hex key that is either 5 bytes or 13 bytes long depending on the 
capability of the radio. Set a 5-byte value for 64-bit WEP or a 13-byte 
value for 128-bit WEP. Hex keys must be preceded by 0x and contain 5 
or 13 hex pairs.

Exit the Intermec Settings applet.