Intermec cn30 User Guide

The following are available from the 8021x Security drop-down list.

• None

• PEAP (page 140)

• TLS (page 144)

• TTLS (page 146)

• LEAP (page 151)

Use “None” to disable 802.11b/g Security and enable WEP encryption. To 
disable 802.1x security:

Set 8021x Security as “None.”

Set Association to “Open.”

Set Encryption to “None.”

To enable WEP encryption:

Set 8021x Security as “None.”

Set Association to either “Open” if WEP keys are not required; or 
“Shared” when WEP keys are required for association.

Set Encryption to “WEP.”

Profile Label

Enter a unique name for your profile.

Network type

Tap the list to select “Infrastructure” if the network uses access points to connect to the corporate 
network or internet; or “Ad-Hoc” to set up a private network with one or more participants.

Channel

If you select “Ad-Hoc” for the network type, select the channel on which you are communicating 
with others in your network. There are up to 11 channels available.

SSID 
(Network 
Name)

This assumes the profile name unless another name is entered in this field. If you want to connect to 
the next available network or are not familiar with the network name, enter “ANY" in this field. 
Consult your LAN administrator for network names.

Enable Power 
Management:

Check this box to conserve battery power (default), or clear this box to disable this feature.