Intermec cn30 User Guide
Chapter 1 — Using the CN30 Mobile Computer
14
CN30 Mobile Computer User’s Manual
Using the Power (I) Key
When you press the (I) key to turn off the CN30, you actually put the
CN30 in Suspend mode. In Suspend mode, the CN30 continues to supply
power to all memory, but turns off power to most hardware. This power-
saving feature is designed to prolong battery life.
CN30 in Suspend mode. In Suspend mode, the CN30 continues to supply
power to all memory, but turns off power to most hardware. This power-
saving feature is designed to prolong battery life.
When you press the (I) key to turn the CN30 back on, your computer
resumes where it was when you turned it off.
resumes where it was when you turned it off.
If you are using WPA or 802.1x security, the computer may need to reau-
thenticate before it starts your application.
thenticate before it starts your application.
If the Battery light flashes and your CN30 does not resume after pressing
(I), your battery may be too low to supply power. Replace the battery. If
replacing the battery does not solve the problem, see “Resetting your CN30
Mobile Computer” on page 16.
(I), your battery may be too low to supply power. Replace the battery. If
replacing the battery does not solve the problem, see “Resetting your CN30
Mobile Computer” on page 16.