Intermec cn30 User Guide
Chapter 1 — Using the CN30 Mobile Computer
16
CN30 Mobile Computer User’s Manual
Resetting Your CN30 Mobile Computer
In some cases where the CN30 Mobile Computer completely stops
responding, it may be necessary to perform a cold reset. Because cold reset-
ting may result in data loss, it is not recommended unless all other recovery
methods have failed.
responding, it may be necessary to perform a cold reset. Because cold reset-
ting may result in data loss, it is not recommended unless all other recovery
methods have failed.
Performing a Warm-Boot on the CN30 Computer
If your charged CN30 Computer does not resume after pressing (I), or if
the computer or an application is locked up, you may need to do a warm-
boot.
the computer or an application is locked up, you may need to do a warm-
boot.
• Press and hold (I) for five to ten seconds, until the screen goes dark.
The CN30 Computer tells you it is performing a warm-boot, then comes
back up to the start screen.
back up to the start screen.
Performing a Cold-Boot on the CN30 Computer
If the CN30 Computer or an application is locked up and does not respond
to a warm-boot, do the following.
to a warm-boot, do the following.
1 Release the lower clip of the hand strap and slide the latch to the left.
2 Remove the keypad module.
3 Press the Reset button located inside the console module.
4 Reinstall the keypad module.
Reset Button
CN30 Console