Intermec 2020 Quick Setup Guide
Federal Communications Commission Radio Frequency Interference
Statement
Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interferences that may cause undesired operation.
conditions: (1) this device may not cause harmful interference, and (2) this device must accept any
interference received, including interferences that may cause undesired operation.
This equipment is intended for operation in a commercial environment, in compliance with the
requirements for a Class A digital device, pursuant to Part 15 of the FCC Rules, and it must not be
used in a residential environment; however, it has also been tested and found to comply with the
more stringent requirements for a Class B device, pursuant to Part 15 of the FCC Rules. It generates,
uses, and can radiate radio frequency energy. If not installed and used in accordance with the
instructions manual, it may cause interference to radio communications. If this equipment causes
harmful interference, the user will be required to correct the interference at their own expense.
requirements for a Class A digital device, pursuant to Part 15 of the FCC Rules, and it must not be
used in a residential environment; however, it has also been tested and found to comply with the
more stringent requirements for a Class B device, pursuant to Part 15 of the FCC Rules. It generates,
uses, and can radiate radio frequency energy. If not installed and used in accordance with the
instructions manual, it may cause interference to radio communications. If this equipment causes
harmful interference, the user will be required to correct the interference at their own expense.
Note
: In order to maintain compliance with FCC Rules, the I/O cables that interconnect between the device
and any peripheral must be specified by Intermec.
Caution:
Changes or modifications not expressly approved by Intermec could void the user’s authority to
operate this equipment.
Industry Canada Compliance
This digital apparatus does not exceed the Class B limits for radio emissions from digital
apparatuses as set out in the radio interference regulations of Industry Canada.
apparatuses as set out in the radio interference regulations of Industry Canada.
Cet appareil numérique n’émet pas de bruits radioéléctriques dépassant les limites applicables aux
appareils numériques de Classe B prescrites dans le règlement sur le brouillage radioéléctrique
édicté par Industrie Canada.
appareils numériques de Classe B prescrites dans le règlement sur le brouillage radioéléctrique
édicté par Industrie Canada.
European Union Compliance
This product complies with EN 55022, EN 50082-1, and EN 60950 as required by the
EMC Directive 89/336/EEC as amended by 92/31/EEC and by the Low Voltage
Directive 73/23/EEC as amended by 93/68/EEC.
EMC Directive 89/336/EEC as amended by 92/31/EEC and by the Low Voltage
Directive 73/23/EEC as amended by 93/68/EEC.
Additional EMI/RFI Compliance
This device meets the Class B limit requirements of CISPR 22.
Agency Approvals
The JZ2020 is UL Listed (UL 1950), CSA Certified (C22.2 #950) and TUV “GS” Licensed (EN 60950
and DIN VDE 0805) for safety when powered by an external Intermec power supply. UL, CSA, and
TUV have approved Intermec power supply 058399 for use with the JZ2020.
and DIN VDE 0805) for safety when powered by an external Intermec power supply. UL, CSA, and
TUV have approved Intermec power supply 058399 for use with the JZ2020.