Intermec 2430 User Guide
Chapter 5—Reader Command Reference
100
Trakker Antares 2400 Family System Manual
Backlight On and Off
Description: Turns the backlight on to easily view the terminal screen in dimly lit
environments, or turns the backlight off. If the backlight is on, it stays on
for the length of time set in the Display Backlight Timeout command as
long as there is no keypad or scanning activity.
for the length of time set in the Display Backlight Timeout command as
long as there is no keypad or scanning activity.
From Network:
%.1 Backlight On
%.0 Backlight Off
%.2 Toggle Backlight
Keypad or Menu: Press the Backlight key (+ or +) or key sequence to turn the backlight
on or off.
Scan:
Backlight On
Backlight Off
*%.1*
*%.0*
*%.1* *%.0*
Toggle Backlight
Toggle Backlight
*%.2*
*%.2*
Backspace
Description: Deletes the last character from the current data record being accumulated.
If there is no data in the buffer, the command has no effect.
From Network: Not
supported
Keypad or Menu: Not
supported
Scan:
Backspace
*-+*
*-+*
Boot Terminal
Description: Boots the terminal. The terminal runs through power-on self test (POST)
to test each major subsystem. The terminal then uses the configuration
currently saved in flash memory to boot, and your application appears on
the screen.
currently saved in flash memory to boot, and your application appears on
the screen.
Use this command when you upgrade the firmware on the terminal or if
your terminal locks up and will not respond.
your terminal locks up and will not respond.
From Network:
-.1
Keypad or Menu: From the Main Menu, choose System Menu and then Upgrade Firmware.
Choose OK, choose YES, and then press d. The Boot Menu appears.
Press 1 or B to boot the terminal.
Press 1 or B to boot the terminal.