Intermec 2430 User Guide

Scan the bar code labels for the file you want to delete. You can scan 
labels from the “Full ASCII Bar Code Chart” on page 284. The label 
must use this format: 

  drive:filename 

Scan this bar code label to exit Accumulate mode and delete the file. 

  Exit Accumulate Mode 

 

*-/* 

 *-/* 

 

Or:  You can create your own bar code labels to delete files by creating a bar 

code in this command format: 

..--drive:filename 

 

Example:  To delete the file SHIPPING.BIN from drive C, use this command:  

..--c:shipping.bin 

 

Description:  Enters the current data record and remains in Accumulate mode. If no 

data exists, a null string is entered. 

 

Note: The Enter command consists of a Start and Stop character and does 
not contain any data values. Therefore, if the terminal is configured for a 
decoded input device, which requires at least one data value in a bar code, 
it cannot scan the Enter command. For a list of decoded input devices, see 
your user’s manual or contact your local Intermec sales representative. 

 

From Network: Not 

supported 

 

Keypad or Menu: Not 

supported 

 

Scan: 

Enter

 

** 

** 

 

Description:  Enters Accumulate mode. You can accumulate data from a series of bar 

code labels and enter them as a single label. 

 

From Network: Not 

supported 

 

Keypad or Menu: Not 

supported 

 

Scan: 

Enter Accumulate Mode

 

*+/* 

*+/*