Intermec 2430 User Guide

Scan this bar code label to exit Accumulate mode and receive the file. 

  Exit Accumulate Mode 

 

*-/* 

 *-/* 

 

Or:  You can create your own bar code labels to receive files by creating a bar 

code in this command format: 

.%Hn,drive:filename 

 

Example:  You want to send an application from the host in your CrossBar network 

to the terminal. On the host, use HEX.EXE to convert the application 
from SHIPPING.BIN to SHIPPING.HEX. On the host, use a utility 
such as InterScan to transmit SHIPPING.HEX through the 9154 or 9161 
to the terminal. Enter this command to receive the file SHIPPING.BIN 
on the terminal’s drive C through COM2:  

.%H2,c:shipping.bin 

The file SHIPPING.HEX is transferred, converted from 7-bit ASCII 
hexadecimal to 8-bit binary, and stored as SHIPPING.BIN on the 
terminal. 

 

Description:  Receives a file from the DCS 300 or host and saves it on the RF or 

Ethernet terminal. 

 

From Network: 

.%R,fromfilename,drive:tofilename

 

where: 

.%R

 

is the command to receive a file that is transmitted over 
the RF or Ethernet network to the terminal. 

fromfilename 

is the name of the file you are transmitting from the DCS 
300 or host to the terminal. On the DCS 300, the file 
must be sent from the D:\USERDATA directory. To 
receive a file from the host, you must identify the path 
and filename. 

 

Note: Do not enter D:\USERDATA in the fromfilename field. 

drive: 

indicates the drive on the RF or Ethernet terminal where 
you want to receive and store the file. You must include 
the colon (:) after the drive letter. 

tofilename 

is the name of the file you want to save on the RF or 
Ethernet terminal. 

 

Keypad or Menu: Not 

supported