Intermec 2430 User Guide
Chapter 5—Reader Command Reference
Trakker Antares 2400 Family System Manual
111
Keypad or Menu: From the Main Menu, choose System Menu, and then choose File
Manager. Choose the drive where you want to rename files.
Note: To use the bar code labels from the “Full ASCII Bar Code Chart,”
you may need to configure the terminal to use Code 39 in Full ASCII
mode. For help, see “Code 39” on page 146.
you may need to configure the terminal to use Code 39 in Full ASCII
mode. For help, see “Code 39” on page 146.
Scan: Follow these steps:
1
Scan this bar code label:
Enter Accumulate Mode / Rename File
*+/...-*
*+/...-*
2
Scan the bar code labels for the file you want to rename. You can scan
labels from the “Full ASCII Bar Code Chart” on page 284. The label
must use this format:
labels from the “Full ASCII Bar Code Chart” on page 284. The label
must use this format:
drive:oldfilename,drive:newfilename
3
Scan this bar code label to exit Accumulate mode and rename the file.
Exit Accumulate Mode
*-/*
*-/*
Or: You can create your own bar code labels to rename files by creating a bar
code in this command format:
...-drive:oldfilename,drive:newfilename
Example: To rename the file SHIPPING.BIN on drive C to DOCK1.BIN, use this
command:
...-c:shipping.bin,c:dock1.bin
Reset Firmware
Description: Resets all firmware on the terminal, resets the application, and runs the
application. You can use this command to perform a warm boot and
restart your application if you are having problems.
restart your application if you are having problems.
From Network:
-.
Keypad or Menu: From the main menu, chose System Menu, and then choose Upgrade
Firmware.
Scan: Reset
Firmware
*-.*
*-.*