Intermec 2430 User Guide
Chapter 5—Reader Command Reference
114
Trakker Antares 2400 Family System Manual
From Network:
/.
Keypad or Menu: Not
supported
Scan: Not
supported
Description: The Scanner Trigger Off command performs the same function as
releasing the scanner trigger on an external scanner or the Scan button on
the hand-held terminal keypad.
the hand-held terminal keypad.
From Network:
/%
Keypad or Menu: Not
supported
Scan: Not
supported
Set Time and Date
Description: Sets the time and date on the terminal. When the terminal receives the
time broadcast command from the 9154 or 9161 controller, the command
sets the clock on the terminal. You can configure the clock with seconds or
without seconds.
sets the clock on the terminal. You can configure the clock with seconds or
without seconds.
Use this command only for backward compatibility with the 95XX
terminal. In the 95XX terminal documentation, this command was called
Enable Clock. If you do not need backward compatibility, use the Time
and Date configuration command. For help, see “Time and Date” on page
255.
terminal. In the 95XX terminal documentation, this command was called
Enable Clock. If you do not need backward compatibility, use the Time
and Date configuration command. For help, see “Time and Date” on page
255.
From Network:
/+data
Acceptable formats for data to set the time and date are:
yy/mm/dd:hh:mm:ss
yy/mm/dd:hh:mm
hh:mm:ss
hh:mm
yy/mm/dd:hh:mm
hh:mm:ss
hh:mm
Year values (yy) from 00 to 95 are interpreted as 2000 through 2095. Year
values from 96 to 99 are interpreted as 1996 through 1999.
values from 96 to 99 are interpreted as 1996 through 1999.
Keypad or Menu: Not
supported.
Example:
Set Time and Date to 1:30
*/+1/Z30*
*/+1/Z30*
Note: To use this reader command, you must configure the terminal to
use Code 39 in Full ASCII mode. For help, see “Code 39” on page 146.
use Code 39 in Full ASCII mode. For help, see “Code 39” on page 146.