Intermec 2430 User Guide
Chapter 5—Reader Command Reference
112
Trakker Antares 2400 Family System Manual
Run Program
Description: Runs the specified program or application that is stored on the terminal.
Note: You cannot store and run applications from the RAM drive (E).
From Network:
//drive:filename
where:
//
is the command to run an application.
drive:
indicates the drive where the application is stored. You must
include the colon (:) after the drive letter.
include the colon (:) after the drive letter.
filename
is the application you want to run.
Keypad or Menu: From the Main Menu, choose System Menu, and then choose File
Manager. Choose the drive where the application is stored.
Note: To use the bar code labels from the “Full ASCII Bar Code Chart,”
you may need to configure the terminal to use Code 39 in Full ASCII
mode. For help, see “Code 39” on page 146.
you may need to configure the terminal to use Code 39 in Full ASCII
mode. For help, see “Code 39” on page 146.
Scan: Follow these steps:
1
Scan this bar code label:
Enter Accumulate Mode / Run Program
*+///*
*+///*
2
Scan the bar code label or labels for the application you want to run.
You can scan labels from the “Full ASCII Bar Code Chart” on page
284. The label must use this format:
You can scan labels from the “Full ASCII Bar Code Chart” on page
284. The label must use this format:
drive:filename
3
Scan this bar code label to exit Accumulate mode and run the
application.
application.
Exit Accumulate Mode
*-/*
*-/*
Or: You can create your own bar code labels to run applications by creating a
bar code in this command format:
//drive:filename
Example: To run the application SHIPPING.BIN, use this command:
//c:shipping.bin