Intermec 2430 User Guide
Chapter 5—Reader Command Reference
Trakker Antares 2400 Family System Manual
117
Transmit File Through the Serial Port
Description: Transmits a file from the terminal through the serial port and saves it on
the host computer.
On the host, you must receive the file using a serial communications
package (for example, Windows 3.1 Terminal, Win95 HyperTerminal,
Crosstalk, or ProComm) that supports one of these protocols:
package (for example, Windows 3.1 Terminal, Win95 HyperTerminal,
Crosstalk, or ProComm) that supports one of these protocols:
• XMODEM
• XMODEM-1K
• YMODEM
XMODEM-1K is a version of XMODEM that supports 1024-byte blocks
as well as the standard 128-byte XMODEM data blocks, which increases
the throughput. YMODEM has the additional ability to transfer a file
name with the file’s data, and it preserves the length of the file without
padding.
as well as the standard 128-byte XMODEM data blocks, which increases
the throughput. YMODEM has the additional ability to transfer a file
name with the file’s data, and it preserves the length of the file without
padding.
Note: Trakker Antares filenames are up to eight characters with a three-
character extension. Files you transfer from the host must use the Trakker
Antares naming conventions.
character extension. Files you transfer from the host must use the Trakker
Antares naming conventions.
From Network:
%%Xn,drive:filename
Transmits a file using XMODEM protocol
%%Kn,drive:filename
Transmits a file using XMODEM-1K
protocol
protocol
%%Yn,drive:filename
Transmits a file using YMODEM protocol
where:
%%X
is the command to transmit a file using XMODEM protocol.
%%K
is the command to transmit a file using XMODEM-1K
protocol.
%%Y
is the command to transmit a file using YMODEM protocol.
n
indicates
the
terminal’s serial port: 1, 2, or 4.
drive:
indicates the drive where the file is stored on the terminal. You
must include the colon (:) after the drive letter.
must include the colon (:) after the drive letter.
filename
is the file you want to transmit.
Keypad or Menu: Not
supported
Note: To scan these bar code labels, you must configure the terminal to
use Code 39 in Full ASCII mode. For help, see “Code 39” on page 146.
use Code 39 in Full ASCII mode. For help, see “Code 39” on page 146.